Web
Analytics Made Easy - StatCounter

diy concrete diamond polishing kit

Buy Terrazzo Restoration Kits
0
What's in the kit:
the diy diamond polishing kit for concrete consists of everything you will need to grind, sand, hone, polish and vitrify your concrete floors. this kit has specialized pads and an adaptor for hard to reach places like behind toilets and in corners and edges. 
approx coverage:  approx 750 to 1000 square feet.

if you need a larger kit then email me with details

for obvious reasons exact contents are not revealed, your kit contains but is not limited to the following:
#1. a proprietary adaptor plate to run all the diamond pads.
#2. a set of diamond electroplated metal bond sanding pads.
#3. a set of diamond resin honing and polishing pads.
#4. a complete set of burnishing and vitrification pads.
#5. multi step mineral additives essential to the process.
#6. an adaptor/driver for corner and perimeter polishing.
#7. and most important a step by step instruction manual.

this is a full diamond restoration.  you will be sanding, honing, polishing, burnishing, vitrifying and crystallizing your floors.

the succession of diamond grits starts at 50 grit and goes all the way to 3000 grit. finishing with a dry high gloss burnishing or "vitrification" with specialized pads that will transform your floors into jewelry you can walk on!

you will still need to rent a floor buffer from home depot or any of your local area tool rental companies. its around $45 a day or $150 a week. the tool rental attached to most Lowe's home improvement stores have a drop off and pick up service for the floor buffer you will need.

the kits comes with a very detailed instruction manual with step by step instructions on how to handle and operate the floor buffer, how to use all the driver plates and diamond pads, as well as how to use the chemicals and nutrients that are in the kit.

the restoration process is done slightly wet at first with a solution of water and different additives using the succession of diamond restoration pads supplied in the kit.

then the final steps are done dry including all the vitrification and burnishing stages where the silica on the surface is turned into glass and where you will see the transformation of your dull dingy floors into a highly polished art deco masterpiece.
*What's not in the kit:
(most everything you need can be purchased, used, cleaned and returned for a full refund in most stores)
#1. any low speed 17" floor buffer (home depot rental).
#2. a shop vac or wet vac. 
#3. a hand held grinder / polisher. 
#4. a micro fiber dry duster.
see the entire restoration process in a slide show - 1 man 2 days
  • Slide Title

    remove the carpet and tack strips

    Button
  • Slide Title

    grind down all your nails

    Button
  • Slide Title

    clean out your holes

    Button
  • scrape and sweep your floor

  • Slide Title

    prepare your patch

    Button
  • Slide Title

    apply your patch

    Button
  • Slide Title

    continue filling all the holes

    Button
  • Slide Title

    sand and hone your patches and perimeters

    Button
  • Slide Title

    wet your floors with the additives and water

    Button
  • Slide Title

    start your succesion of diamond pads

    Button
  • Slide Title

    shop vac between every diamond pad

    Button
  • Slide Title

    let the floor dry then start the vitrification process

    Button
  • Slide Title

    celebrate your achievemant

    Button
  • Slide Title

    enjoy your gemstone floors
    (actual after pics)

    Button
  • Slide Title

    enjoy your gemstone floors
    (actual after pics)

    Button
  • Slide Title

    enjoy your gemstone floors
    (actual after pics)

    Button

Purchase a D.I.Y. Concrete Diamond Polishing Kit

click the button below to be taken to our online store.
Online Store
Share by: